32% OFF DIY Case Making Set, Plastic Carrying Sheath with Waist Clip, Knife Clip, Back Clip, Brass Grommet Eyelet Findings, EVA Foam Board, Mixed Color, 107x21x4mm

DIY Case Making Set, Plastic Carrying Sheath with Waist Clip, Knife Clip, Back Clip, Brass Grommet Eyelet Findings, EVA Foam Board, Mixed Color
Size:
Plastic Sheets, Rectangle: 310x201x2mm, 2pcs;
Plastic Carrying Sheath with Waist Clip: 2 sets:
holder: 107x21x4mm, 2pcs;
gasket: 13x2.5mm, 4pcs;
gasket: 12.5x3mm, 4pcs;
screw: 9x9mm, 4pcs;
screw: 11x7mm, 4pcs.
Carbon Steel Leather Puncher Hole Drilling Tool: about 1 set:
round: 22x16mm, pin: 4.5mm;
stick: 84x10mm, hole: 4.5mm.
Brass Grommet Eyelet Findings: about 50 sets:
clasp: 6x4mm, pin: 3.5mm, 50pcs;
finding: 6x0.3mm, 3.5mm inner diameter, 50pcs;
Iron Nuts: about 10mm in diameter, 8.5mm thick, pin: 5mm, hole: 3.5mm, 30pcs;
Carbon Steel Leather Hole Punches: about 84mm long, 8.5mm in diameter, hole: 5.5mm, 1pc;
Nylon Gasket, Round: about 6mm in diameter, 1mm thick, 3mm inner diameter, 30pcs;
EVA Foam Board: about 200mm wide, 300mm long, 25mm thick, 2pcs;
Carbon Steel Screw: about 7.5mm long, 6mm in diameter, pin: 2.8mm, 30pcs.

Priced per 1 Set

Please Note: The color may be slightly different from the picture because of different display device.